LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2911 (Engine Mechanical - 6.7L Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Removal

Oil Level Indicator and Tube: Removal

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Upper oil level indicator tube 

  1. Position the vehicle on a hoist. For additional information, refer to JACKING & LIFTING article.
  2. Remove the bolt and position aside the transmission oil level indicator tube.
  3. Remove the oil level indicator.
  4. Remove the bolt for the oil level indicator tube.
  5. From below, remove the oil level indicator tube from the engine rear cover.
  6. Remove the oil level indicator tube from the vehicle.
    • Remove and discard the 2 O-ring seals.

    Lower oil level indicator tube 

  7. Remove the engine rear cover. For additional information, refer to ENGINE REAR COVER  in this service information.
  8. Remove the 2 bolts and the lower oil level indicator tube.
scientia non olet · About LEMON Manuals