LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2911 (Engine Mechanical - 6.7L Diesel -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Assembly

Cylinder Head: Assembly

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the valve seal assembly with clean engine oil prior to installing.
    NOTE: The valve seal assembly will not seat completely by hand. The Valve Spring Compressor will seat the valve seal assembly when installing the valve stem keys.
  1. Install the new valve seal assembly.
  2. Install the valve.
  3. Install the valve spring and valve spring retainer.
    4. NOTE: Verify that the valve stem keys are correctly seated after removal of the Valve Spring Compressor or engine damage may occur.
  4. Using the Valve Spring Compressor, install the valve stem keys.
    • Verify that the valve stem keys are correctly seated.
scientia non olet · About LEMON Manuals