LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2909 (Engine Mechanical - 6.2L (2V) -- F250-F350 Super Duty) >> In-Vehicle Repair >> Oil Pump Screen and Pickup Tube >> Removal

Oil Pump Screen and Pickup Tube: Removal

WARNING: This page is about a different car, the 2011 Ford Pickup and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to OIL PAN  in this service information.
  2. Remove the oil pump screen and pickup tube support bracket nut.
    Fig 1: Locating Oil Pump Screen And Pickup Tube Support Bracket Nut
    G07479578Courtesy of FORD MOTOR CO.
  3. Remove the 2 bolts and the oil pump screen and pickup tube.
    Fig 2: View Of Oil Pump Screen And Pickup Tube Bolts
    G07479579Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals