LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2909 (Engine Mechanical - 6.2L (2V) -- F250-F350 Super Duty) >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Removal

Oil Level Indicator and Tube: Removal

WARNING: This page is about a different car, the 2011 Ford Pickup and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH engine support insulator-to-cylinder block bracket. For additional information, refer to ENGINE SUPPORT INSULATORS  in this service information.
  2. Remove the RH exhaust manifold. For additional information, refer to EXHAUST MANIFOLD - RH  in this service information.
  3. Remove the oil level indicator.
  4. Remove the bolt and the oil level indicator tube.
    • Discard the O-ring seal.
scientia non olet · About LEMON Manuals