LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2839 (Interior Trim And Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> Cowl Side Trim Panel

Cowl Side Trim Panel

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Left side shown in illustration, right side similar.

Regular Cab and Crew Cab 

    NOTE: To avoid damage to the scuff plate trim panel, remove any retaining clips from the body and attach to the scuff plate trim panel before installing.
    Fig 1: Removing Door Opening Scuff Plate Trim Panel
    G06779570Courtesy of FORD MOTOR CO.
  1. Remove the door opening scuff plate trim panel.

    SuperCab 

  2. NOTE: To avoid damage to the scuff plate trim panel, remove any retaining clips from the body and attach to the scuff plate trim panel before installing.
    Fig 2: Removing Front Of Door Opening Scuff Plate Trim Panel
    G06779571Courtesy of FORD MOTOR CO.
  3. Lift upward and partially remove the front of the door opening scuff plate trim panel.

    All vehicles 

  4. If equipped, remove the pushpin retainer.
  5. Remove the cowl side trim panel.
  6. To install, reverse the removal procedure.