LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2815 (Suspension System - General Information -- F250-F550 Super Duty) >> Diagnosis And Testing >> Suspension System >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Road test.
  2. Inspect tires.
  3. Inspect chassis and underbody.
    • Remove any excessive accumulation of mud, dirt or road deposits from the chassis and underbody.
  4. Inspect for aftermarket equipment.
    • Check for aftermarket changes to the steering, suspension, wheel and tire components (such as competition or heavy duty) The specifications shown in this service information do not apply to vehicles equipped with aftermarket equipment.
    VISUAL INSPECTION CHART

    Visual Inspection Chart
    Mechanical
    • Front wheel bearing(s)
    • Loose or damaged front or rear suspension components
    • Loose, damaged or missing suspension fastener(s)
    • Loose or damaged leaf spring shackle(s)
    • Incorrect spring usage
    • Damaged or sagging spring(s)
    • Damaged or leaking shock absorber(s)
    • Worn or damaged suspension bushing(s)
    • Loose, worn or damaged steering system components
    • Damaged axle components
  5. If an obvious cause for an observed or reported condition is found, correct the cause (if possible) before proceeding to the next step.
  6. If the fault is not visually evident, GO to SYMPTOM CHART - SUSPENSION SYSTEM  or GO to SYMPTOM CHART - NVH .