Pinpoint Test A: Inner Edge/Shoulder Wear

WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

A1 MEASURE THE TREAD DEPTH
- Using a tread depth gauge or similar tool, measure the inside edge/shoulder tread depth.
- Is the tread depth greater than 2/32 inch?
- Yes: ROTATE the wheel and tire assemblies. REFER to WHEEL AND TIRE ROTATION .
  CHECK and ADJUST the toe to nominal +0.15 degrees (toe in). CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .
- No: INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .