LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2451 (Transfer Case - Four Wheel Drive (4WD) Systems -- F250-F550 Super Duty) >> Diagnostic Tests >> Four Wheel Drive (4WD) Systems - Mechanical Shift >> Pinpoint Tests >> Pinpoint Test F: Mechanical Shift-On-Stop (MSOS) Functional Test >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When operating in four wheel drive high (4H) mode, the transfer case locks the front driveline to the rear. When set to the LOCK position, the manual hub locks connect the front axle shafts to the wheel hubs. When in four wheel drive low (4L) mode, the transfer case low range gear set provides an additional 2.72:1 gear reduction. When operating in two wheel drive high (2H) mode, the transfer case decouples the front driveline from the rear driveline. For improved fuel economy, both manual hub locks should be set to "free" in 2H mode.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals