LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2440 (Fuel Charging System - Turbocharger -- F250-F550 Super Duty) >> Removal And Installation >> Turbocharger Pedestal >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the turbocharger. For additional information, refer to Turbocharger - Body Off  or Turbocharger - Body On .
    2. NOTE: Mark the 2 side center bolts so they can be installed in their original position.
  2. Remove the bolts and the turbocharger pedestal.
    • To install, tighten to 62 Nm (46 lb-ft).
  3. To install, reverse the removal procedure.
    • Install a new press-in-place gasket.
scientia non olet · About LEMON Manuals