LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2436 (Engine - 6.4L 99R Diesel -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Valve Tappets >> Installation

Valve Tappets: Installation

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: To prevent engine damage, keep the valve tappets in the order in which they were removed. Install all valve tappets back in their original positions.
  1. Apply clean engine oil to the valve tappets and install into the valve tappet guide. Install the valve tappet guide and the 4 bolts.
    • Tighten to 13 Nm (115 lb-in).
  2. Install the RH cylinder head or LH cylinder head. For additional information, refer to Cylinder Head - Body Off  or Cylinder Head - Body On .
scientia non olet · About LEMON Manuals