LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2436 (Engine - 6.4L 99R Diesel -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Oil Pressure Regulator >> Installation

Oil Pressure Regulator: Installation

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Install a new O-ring seal on the oil pressure regulator plug.
  1. Apply clean engine oil to the oil pressure regulator plug O-ring seal, spring and valve and install in the oil pump.
    • Tighten to 35 Nm (26 lb-ft).
scientia non olet · About LEMON Manuals