LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2436 (Engine - 6.4L 99R Diesel -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Oil Pan - Upper >> Removal

Oil Pan - Upper: Removal

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Remove the lower oil pan. For additional information, refer to Oil Pan - Lower, Partial Body Lift  or Oil Pan - Lower, Body On .

    2. Partial body lift 

  2. Remove the oil level indicator. Remove the retaining nut for the oil level indicator tube.
    3. Fig 1: Locating Retaining Nut From Oil Level Indicator Tube
    GF0048597Courtesy of FORD MOTOR CO.

    Body on 

  3. Remove the oil level indicator.

    4. All vehicles 

  4. Remove the bolt. Remove the oil level indicator tube and position it aside.
    • Remove and discard the O-ring seal.
    5. Fig 2: Locating Oil Level Indicator Tube Bolt
    GF0048598Courtesy of FORD MOTOR CO.
  5. Remove the bolt for the fuel tube retainer.
  6. Remove the 9 bolts and the upper oil pan.
    • Remove and discard the press-in-place gasket. Clean and inspect the sealing surfaces.
scientia non olet · About LEMON Manuals