LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2436 (Engine - 6.4L 99R Diesel -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Flywheel >> Installation

In-Vehicle Servicing: Flywheel: Installation

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flywheel, reinforcement ring and 10 new bolts. Tighten in 2 stages, in the sequence shown.
    • Stage 1: Tighten to 5 Nm (44 lb-in).
    • Stage 2: Tighten to 94 Nm (69 lb-ft).
    2. Fig 1: Tightening Flywheel Bolts In Sequence
    GF0048532Courtesy of FORD MOTOR CO.
  2. Install the clutch disc and pressure plate. For additional information, refer to CLUTCH article.
scientia non olet · About LEMON Manuals