Engine Rear Cover - Body On: Notes
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Caps, Fuel System | 310-158 |
Material
| Item | Specification |
|---|---|
| RTV Silicone Sealant TA-31 |
- |
| Item | Part Number | Description |
|---|---|---|
| 1 | W302674 | Glow plug module heat shield push nuts (3 required) |
| 2 | 12A345 | Glow plug module heat shield |
| Item | Part Number | Description |
|---|---|---|
| 1 | W705790 | Engine-to-body ground wire nut |
| 2 | 19A095 | Engine-to-body ground wire |
| 3 | W300049 | RH high-pressure fuel injection pump heat shield nut |
| 4 | W301401 | RH high-pressure fuel injection pump heat shield bolts (2 required) |
| 5 | - | RH high-pressure fuel injection pump heat shield bolt |
| 6 | 9G478 | RH high-pressure fuel injection pump heat shield |
| 7 | W300049 | LH high-pressure fuel injection pump heat shield nuts (3 required) |
| 8 | 9180 | Fuel tube bracket |
| 9 | 9G478 | LH high-pressure fuel injection pump heat shield |
| Item | Part Number | Description |
|---|---|---|
| 1 | - | High-pressure fuel injection pump electrical connector (part of 9F759) |
| 2 | - | Fuel injector return tube fitting (part of 9C273) |
| 3 | W300002 | Fuel rail supply tube bracket bolts (2 required) |
| 4 | 9A332 | LH fuel supply tube |
| 5 | 9A332 | RH fuel supply tube |
Fig 4: Exploded View Of High-Pressure Fuel Injection Pump Supply & Return Tubes With Torque Specifications
| Item | Part Number | Description |
|---|---|---|
| 1 | W300049 | High-pressure fuel injection pump supply tube bracket nuts (2 required) |
| 2 | W302473 | Fuel tube-to-high-pressure fuel injection pump nuts (2 required) |
| 3 | W302474 | Fuel tube-to-high-pressure fuel injection pump washers (2 required) |
| 4 | 9C330 | High-pressure fuel injection pump supply tube |
| 5 | 9D309 | High-pressure fuel injection pump-to-fuel cooler return tube |
| Item | Part Number | Description |
|---|---|---|
| 1 | W300014 | High-pressure fuel injection pump cover bolts (5 required) |
| 2 | 9A413 | High-pressure fuel injection pump cover |
| 3 | 6619 | High-pressure fuel injection pump cover press-in-place gasket |
| 4 | - | Volume control valve electrical connector (part of 6619) |
| 5 | - | Pressure control valve electrical connector (part of 6619) |
| 6 | 6619 | High-pressure fuel injection pump cover gasket |
NOTE:
Manual transmission engine rear cover shown, automatic transmission engine rear cover similar.
| Item | Part Number | Description |
|---|---|---|
| 1 | W300029 | Engine rear cover bolt (M8, 8 required) |
| 2 | 6379 | Engine rear cover bolt (M10, 3 required) (manual transmission only) |
| 3 | 6G091 | Engine rear cover |
| 4 | 6D083 | Engine rear cover gasket |