LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2436 (Engine - 6.4L 99R Diesel -- F250-F550 Super Duty) >> General Procedures >> Valve Spring Squareness

Valve Spring Squareness

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all valve springs in a suitable solvent.
  2. Inspect valve springs for rust, pitting, distortion and cracks. If any of these conditions exist, install new valve springs.
  3. Verify that the spring ends are flat and square to prevent lateral loads on the valve stem. Install new valve springs as necessary.
    4. Fig 1: Checking Valve Spring Squareness
    GF0034910Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals