LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2436 (Engine - 6.4L 99R Diesel -- F250-F550 Super Duty) >> General Procedures >> Crankshaft Connecting Rod Bearing Journal Diameter

Crankshaft Connecting Rod Bearing Journal Diameter

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect crankshaft journals for scratches, grooves and scoring.
  2. Use a 75-100 mm (3-4 in) micrometer to measure the diameter of each journal. Measure each journal at 2 points, 90 degrees apart. Move the micrometer over the entire width of the journal. For additional information, refer to Specifications.
    3. Fig 1: Measuring Crankshaft Connecting Rod Bearing Journal Diameter
    GF0034887Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals