LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2436 (Engine - 6.4L 99R Diesel -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly And Assembly

Disassembly And Assembly

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Mark the connecting rod and piston to make sure correct orientation on reassembly.
  1. Remove the 2 piston pin retainers.
    2. NOTE: The piston pins are a floating type piston pin and should not require a press to remove or install them.
  2. Remove the connecting rod.
    • Remove the piston pin.
    • Remove the connecting rod.
  3. To assemble, reverse the disassembly procedure.
    • Lubricate the connecting rod piston pin bore, piston pin bore and piston pin with clean engine oil prior to assembly.
scientia non olet · About LEMON Manuals