Normal Operation - Vehicles not equipped with a Circuit Deactivation Ignition Module (CDIM)
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
When the ignition switch is placed in the RUN position fused ignition voltage is sent to:
- the control side of the run/start relay.
- the internal logic of the Smart Junction Box (SJB) for RUN circuit monitoring.
- SJB fuse 42 (10A).
- SJB fuse 43 (10A).
- SJB fuse 44 (10A).
- SJB fuse 45 (5A).