LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2409 (Steering Column Switches -- F250-F550 Super Duty) >> Diagnostic Tests >> Steering Column Switches >> Inspection and Verification >> DTC Charts

DTC Charts

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SMART JUNCTION BOX (SJB) DTC CHART

DTC Description Source Action
B2A20 Ignition Stuck in START Smart Junction Box (SJB) Go to Pinpoint Test E .
B2844 Ignition Fault SJB Go to Pinpoint Test F .
U2472 Unexpected Ignition State SJB Go to Pinpoint Test F .
All other DTCs - SJB REFER the Master DTC Chart in MULTIFUNCTION ELECTRONIC MODULES article.
CIRCUIT DEACTIVATION IGNITION MODULE (CDIM) DTC CHART

DTC Description Source Action
B1342 ECU is Faulted Circuit Deactivation Ignition Module (CDIM) INSTALL a new CDIM. REFER to Circuit Deactivation Ignition Module (CDIM) .
B1355 Ignition Run Circuit Failure CDIM Go to Pinpoint Test G .
B1359 Ignition Run/ACC Circuit Failure CDIM Go to Pinpoint Test G .
B2477 Module Configuration Failure CDIM CLEAR the DTC. CARRY OUT the self-test. RETRIEVE and RECORD any DTCs. If DTC B2477 returns, INSTALL a new CDIM. REFER to Circuit Deactivation Ignition Module (CDIM) .
U2050 No Application Present CDIM CLEAR the DTC. CARRY OUT the self-test. RETRIEVE and RECORD any DTCs. If DTC U2050 returns, INSTALL a new CDIM. REFER to Circuit Deactivation Ignition Module (CDIM) .