LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2399 (Interior Trim And Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> Cab Rear Trim Panel - Crew Cab >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear center safety belt retractor. For additional information, refer to SAFETY BELT SYSTEM article.
  2. Remove the RH and LH C-pillar trim panels. For additional information, refer to C-Pillar Trim Panel - Crew Cab .
  3. Remove the 2 cab rear trim panel push pin retainers.
    4. Fig 1: Locating Cab Rear Trim Panel Push Pin Retainers
    GF0047838Courtesy of FORD MOTOR CO.
  4. Remove the cab rear trim panel.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals