LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2383 (Wheels & Tires -- F250-F550 Super Duty) >> Diagnostic Tests >> Wheels And Tires >> Pinpoint Tests >> Pinpoint Test B: Outer Edge/Shoulder Wear >> Pinpoint Test B: Outer Edge/Shoulder Wear

Pinpoint Test B: Outer Edge/Shoulder Wear

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1 MEASURE THE TREAD DEPTH 
    • Using a tread depth gauge or similar tool, measure the outside edge/shoulder tread depth.
    • Is the tread depth greater than 1.58 mm (2/32 in)? 
    1. YES  : ROTATE the wheel and tire assemblies. REFER to Wheel and Tire Rotation .

      CHECK and ADJUST the toe to nominal -0.15 degrees (toe-out). CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION article.

    2. NO  : INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION article.
scientia non olet · About LEMON Manuals