KOEO Injector Electrical Self-Test: Purpose
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before carrying out the KOEO injector electrical self-test, allow the engine to stabilize at the temperature necessary to recreate the symptom. Access the PCM and record the freeze frame data. The freeze frame data contains information which can be used to recreate original conditions that caused the symptom. Refer toFREEZE FRAME DATA
for more information.
The purpose of this test is to determine if the injectors are functioning.
KOEO Injector Electrical Self-Test
- Use the scan tool. Injector DTCs will be transmitted after the self-test is completed.
| Injector Trouble Codes |