P1536 - Parking Brake Switch Circuit
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P1536 - PARKING BRAKE SWITCH CIRCUIT
| Description: | The parking brake applied switch provides an input signal to the powertrain control module (PCM) indicating the current status of the parking brake (applied or released). The parking brake signal circuit is pulled to ground with the parking brake applied. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Check for a loose connection, and damaged or corroded terminals. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST I . | |||