P0301 - Cylinder 1 Misfire Detected
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P0301 - CYLINDER 1 MISFIRE DETECTED
| Description: | The powertrain control module (PCM) continuously monitors the crankshaft speed and acceleration for each cylinder event. When the deceleration is detected the PCM uses the crankshaft position (CKP) and the camshaft position (CMP) signal information to determine which cylinder misfired. The DTC is set when the misfire event occurred in the cylinder due to a poor cylinder compression, fuel delivery concern or mechanical engine concern. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Access the freeze frame data (if available) and record the DTC conditions. The misfire freeze frame data may be used to determine the operating conditions when the misfire DTC was set. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST AR . | |||