LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels - Analog >> System Tests >> Test H: Safety Belt Warning Indicator Is Inoperative (Chime Is Operative)/ Does Not Operate Correctly

Test H: Safety Belt Warning Indicator Is Inoperative (Chime Is Operative)/ Does Not Operate Correctly

  1. Using New Generation Star (NGS) tester, perform Instrument Cluster Module (ICM) active command. Select ICMWARNING LAMPS AND CHIME active command. Trigger ALL LAMPS active. Observe seat belt warning indicator. If seat belt warning indicator illuminates, repair air bag concern. See DIAGNOSIS & TESTING article in lemon-25(R) AIR BAG SERVICE & REPAIR MANUAL, DOMESTIC & IMPORTED MODELS. If seat belt warning indicator does not illuminate, go to next step.
  2. Disconnect all instrument cluster harness connectors. Inspect for corrosion and pushed out pins. Connect all instrument cluster harness connectors, ensuring they seat correctly. Operate system and verify if concern is still present. If concern is still present, replace instrument cluster. Clear DTCs and perform instrument cluster self-test. If concern is not present, system is operating correctly at this time. Concern may have been caused by a loose or corroded connector.
scientia non olet · About LEMON Manuals