LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Analog >> System Tests >> Test R: Turn/Hazard Indicator Inoperative

Test R: Turn/Hazard Indicator Inoperative

  1. Turn ignition switch to RUN position. Operate turn signals. Operate hazard lights. If turn signals and hazard lights operate correctly, go to next step. If turn signals and hazard lamps do not operate correctly, repair turn signals and/or hazard lights concern. See AUTOLAMPS - WINDSTAR article.
  2. Disconnect all instrument cluster harness connectors. Inspect for corrosion and pushed out pins. Connect all instrument cluster harness connectors, ensuring they seat correctly. Operate system and verify if concern is still present. If concern is still present, replace instrument cluster. Clear DTCs and perform instrument cluster self-test. If concern is not present, system is operating correctly at this time. Concern may have been caused by a loose or corroded connector.
scientia non olet · About LEMON Manuals