LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Analog >> System Tests >> Test N: Abs Warning Indicator Inoperative

Test N: Abs Warning Indicator Inoperative

  1. Turn ignition switch to LOCK position. Connect New Generation Star (NGS) to Data Link Connector (DLC). Using NGS tester, select ICM WARNING LAMPS AND CHIME active command. Trigger ALL LAMPS active. Observe Anti-Lock Brake System (ABS) warning indicator. If ABS warning indicator illuminates, repair ABS concern. See ANTI-LOCK/TRACTION CONTROL - WINDSTAR article in BRAKES. If ABS warning indicator does not illuminate, go to next step.
  2. Disconnect all instrument cluster harness connectors. Inspect for corrosion and pushed out pins. Connect all instrument cluster harness connectors, ensuring they seat correctly. Operate system and verify if concern is still present. If concern is still present, replace instrument cluster. Clear DTCs and perform instrument cluster self-test. If concern is not present, system is operating correctly at this time. Concern may have been caused by a loose or corroded connector.
scientia non olet · About LEMON Manuals