LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1705 (Wheels & Tires -- F250-F550 Super Duty) >> Diagnostic Tests >> Wheels And Tires >> Pinpoint Tests >> Pinpoint Test A: Inner Edge/Shoulder Wear >> Pinpoint Test A: Inner Edge/Shoulder Wear

Pinpoint Test A: Inner Edge/Shoulder Wear

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. A1 MEASURE THE TREAD DEPTH 
    • Using a tread depth gauge or similar tool, measure the inside edge/shoulder tread depth.
    • Is the tread depth greater than 1.58 mm (2/32 in)? 
    1. YES  : ROTATE the wheel and tire assemblies.

      CHECK and ADJUST the toe to nominal +0.15° (toe-in). CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION article.

    2. NO  : INSTALL a new tire(s).

      CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION article.

scientia non olet · About LEMON Manuals