LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1354 (Transfer Case - Four Wheel Drive (4WD) Systems -- F250-F550 Super Duty) >> Removal And Installation >> Mode Select Switch (MSS) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the mode select switch (MSS) knob.
  2. Remove the bezel from the instrument cluster finish panel.
    Fig 1: Identifying Instrument Cluster Finish Panel
    G04650796Courtesy of FORD MOTOR CO.
  3. Disconnect the wiring harness connector.
    Fig 2: Locating Wiring Harness Connector
    G04650797Courtesy of FORD MOTOR CO.
  4. Remove the 2 screws and the MSS.
    Fig 3: Locating Screws And MSS
    G04650798Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals