LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.8L V6 (VIN 4) >> Removal & Installation >> Balance Shaft >> Inspection

Balance Shaft: Inspection

Inspect components for damage. Measure balance shaft journal O.D. and runout. Replace components if damaged or not within specification. See BALANCE SHAFT SPECIFICATIONS  table.

BALANCE SHAFT SPECIFICATIONS

Application In. (mm) 
End Play .003-.008 (.08-.20)
Journal O.D. 2.0505-2.0515 (52.083-52.108)
Runout .001 (.03)
scientia non olet · About LEMON Manuals