| 215 - ELECTRICAL ROUTINE |
| Powertrain Control System |
|
- Electrical inputs/outputs, vehicle wiring harnesses, PCM, shift solenoids, digital transmission range TR sensor
|
| 315 - HYDRAULIC/MECHANICAL ROUTINE |
| Shift Linkage, Digital TR Sensor |
- Inspect and repair as required. Verify transmission shift cable adjustment. Refer to CABLE ADJUSTMENT
. Adjust transmission shift cable as necessary. After repairing transmission shift cable, verify that the digital TR sensor is correctly adjusted. Adjust the digital TR sensor as necessary.
|
- Damaged or incorrectly adjusted
|
| Incorrect Pressures |
- Check for which pressures are on and refer to Band/Clutch Application Chart 601 and corresponding routines.
- 324, 301
- 325, 301
- 323, 324, 325, 301
- 324
- 325
- 323, 324, 325
- Refer to appropriate mechanical diagnosis.
|
- Low reverse clutch pressure, low reverse band pressure, low line pressure
- Forward Off, Intermediate Off, Direct X
- Forward Off, Intermediate X, Direct Off
- Forward Off, Intermediate X, Direct X
- Forward X, Intermediate Off, Direct X
- Forward X, Intermediate X, Direct Off
- Forward X, Intermediate X, Direct X
- Forward X, Intermediate Off, Direct Off
|
| Mechanical |
|
- Bands, clutches or seals damaged or worn
|