| 252 - ELECTRICAL ROUTINE |
| Powertrain Control System |
- Inspect for leakage and repair as required.
|
- Electrical inputs/outputs, sensor seals leaking (digital TR, OSS, vehicle speed sensor VSS, if equipped, or transmission connector)
|
| 352 - HYDRAULIC/MECHANICAL ROUTINE |
| Case |
- Check the vent for free breathing. Check the fluid level. Check the transmission for overheat conditions. Repair as required.
|
- Case vent, case porosity, case cracked
|
| Seals/Gaskets |
- Remove all traces of lubricant on exposed surfaces of the transmission. Check the vent for free breathing. Operate the transmission at normal temperatures and perform fluid leakage check. Repair as required.
|
- Leakage at gaskets, seals, etc. (refer to external sealing illustration for potential leak locations).
|
| Other |
- Locate the source of the leak. Repair as required.
|
- Cooler fitting, cooler lines pressure tap, converter drain plug, band anchor pins
|