Arm - Lower: Removal

CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number must be installed if installation becomes necessary. If substitution is necessary, the part must be of the same finish and property class. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.

Mark the rear shock absorber (18125) relative to the protective sleeve with the vehicle in a static, level ground position (curb height).

Fig 1: Referencing Rear Shock Absorber
Courtesy of FORD MOTOR CO.
Remove the muffler assembly(ies). For additional information, refer to EXHAUST .
Remove the rear spring (5560). For additional information, refer to SPRING - COIL .
Remove the lower suspension arm and bushing (5A649) from the body attachment.
1. Remove and discard the bolt and nut.
2. Remove the lower arm.
  
  Fig 2: Removing Lower Arm From Body Mount
  Courtesy of FORD MOTOR CO.