Activating System (Blazer, Bravada, Envoy, Jimmy, Sonoma & S10)
- Remove key from ignition switch. Ensure SIR fuse is still removed from fuse block. Connect passenger air bag 2-pin Yellow SIR connector. Install CPA clip. Connect driver air bag 2-pin Yellow SIR connector at base of steering column. Install CPA clip. Install knee sound insulator and knee bolster.
- Install SIR fuse in fuse block. Staying away from both air bags, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.
Courtesy of GENERAL MOTORS CORP.