LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls Self-Diagnostics - EEC-V - CNG & Gasoline - System Tests (Evaporative Emissions) >> System Tests (Evaporative Emissions) >> Canister Vent Solenoid Closing Procedure

Canister Vent Solenoid Closing Procedure

Connect scan tool to Data Link Connector (DLC) and select OUTPUT TEST MODE under ADDITIONAL SYSTEM FUNCTIONS. Turn ignition switch to ON position. Select FTP and FTP V PID from PID/DATA MONITOR & RECORD menu. Select ALL OFF mode. Close canister vent solenoid by pressing START button on scan tool.

scientia non olet · About LEMON Manuals