LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 3.8L V6 (VIN 4) >> Removal & Installation >> Valve Lifter >> Removal

Valve Lifter: Removal

  1. Remove upper and lower intake manifolds. See INTAKE MANIFOLD . Remove valve covers. Loosen rocker arm bolts, and pivot rocker arms from push rods.
  2. Mark push rod location, and remove push rods. Remove guide plate retainers. See Fig 1. Remove guide plate. Mark valve lifter location for reassembly reference. Remove valve lifters.
Fig 1: Exploded View Of Valve Lifter & Components
G90C02646Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals