LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 3.8L V6 (VIN 4) >> Overhaul >> Cylinder Head >> Valves

Cylinder Head: Valves

CAUTION: DO NOT remove more than .010" (.25 mm) from end of valve stem when resurfacing tip of valve.

Ensure head diameter, valve face runout, stem diameter and valve margin are within specification. See VALVES & VALVE SPRINGS  table under ENGINE SPECIFICATIONS.

scientia non olet · About LEMON Manuals