LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Focus ZTS, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 2.0L Inline >> Removal & Installation >> Thermostat >> Removal (Focus)

Removal (Focus)

  1. Drain the cooling system.
  2. Disconnect the coolant hoses and detach the thermostat housing.
    Fig 1: Disconnecting Coolant Hoses
    G01611787Courtesy of FORD MOTOR CO.
  3. Remove the thermostat.
    Fig 2: Removing Thermostat
    G01611788Courtesy of FORD MOTOR CO.
  4. Remove and discard the O-ring seals.
    Fig 3: Removing And Discard O-Ring Seals
    G01611789Courtesy of FORD MOTOR CO.