LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Focus ZTS, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 2.0L Inline >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

CAUTION: DO NOT rotate camshafts with timing belt removed, or engine damage may result.

Disconnect negative battery cable. Remove air cleaner. Remove valve cover. Remove camshaft oil seal. See CAMSHAFT SEAL . Remove ignition coil, and set aside. Remove ignition coil bracket. Remove rocker arms. Remove camshaft thrust plate. Remove camshaft plug from rear of engine. Remove camshaft toward rear of engine. See CAMSHAFT  table for camshaft specifications.

scientia non olet · About LEMON Manuals