LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Focus ZTS, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Removal And Installation >> Thermostat - 2.0L Zetec-E (Zetec) >> Installation

Thermostat - 2.0L Zetec-E (Zetec): Installation

    NOTE: Install a new rubber seal.
    Fig 1: Installing Thermostat Cover Bolts
    G03433062Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Fill the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
scientia non olet · About LEMON Manuals