Stall Speed Test Procedure
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2003 Mazda B4000, 2003 Mazda B3000, 2003 Mazda B2300, 2002 Mazda B4000, and 2002 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Performing stall speed test procedure for an extended period of time may set Diagnostic Trouble Code (DTC) P0712 or P1783. Always clear DTC after performing stall speed test. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM.
Connect tachometer to engine. Apply parking and service brakes firmly. Place gearshift lever in each gear. Press accelerator completely to floor and record tachometer RPM reading in each gear. DO NOT exceed 5-second limit. Engine speed should be within specifications. See STALL SPEED SPECIFICATIONS table. If engine speed is not within specifications, diagnose and repair. See STALL SPEED TEST RESULTS .
STALL SPEED SPECIFICATIONS
| Application | Stall Speed RPM | |
|---|---|---|
| Explorer/Mountaineer (4.0L OHV) | 2610-2983 | |
| Explorer/Mountaineer (4.0L SOHC) | 2632-3114 | |
| Explorer Sport & Sport Trac | ||
| With ID Tag XL2P-DA & XL2P-CA | 2632-3114 | |
| With ID Tag IL5P-DA & IL5P-EA | 2557-3036 | |
| Mazda "B" Series | ||
| 2.3L | 2621-3050 | |
| 3.0L | 2870-3338 | |
| 4.0L | 2405-2800 | |
| Ranger | ||
| 2.3L | 2616-3057 | |
| 3.0L | 2825-3400 | |
| 4.0L | 2557-3032 | |