Transmission Fluid Temperature (TFT) Sensor: Removal
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission fluid pan gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter in this article.
- Disconnect the transmission fluid temperature (TFT) sensor electrical connector.
- Press the tab, rotate the sensor counterclockwise and pull out.
- Inspect the O-ring seal. If the O-ring seal is damaged, install a new TFT sensor.