Glow Plug: Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Install the glow plug.
- Tighten to 19 Nm (14 lb-ft).

Fig 1: Locating Glow Plug

Courtesy of FORD MOTOR CO.

Clean and apply clean engine oil to the O-ring seals.

Fig 2: Locating O-Ring Seal

Courtesy of FORD MOTOR CO.

Using the special tool, install the glow plug harness.

Fig 3: Identifying Glow Plug Harness Special Tool (303-1114)

Courtesy of FORD MOTOR CO.