LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Focus LX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2189 (Interior Trim And Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> A-Pillar Trim Panel >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Right side shown, left side similar.
  1. Remove the right front inside assist handle covers.
  2. Fig 1: Locating Right Front Inside Assist Handle Covers
    GF0004829Courtesy of FORD MOTOR CO.
  3. Remove the bolts.
  4. Fig 2: Locating Assist Handle Cover Bolts
    GF0004830Courtesy of FORD MOTOR CO.
    NOTE: Carefully rotate the A-pillar trim panel during this step.
  5. Pry the A-pillar trim panel to remove.
  6. Fig 3: Prying A-Pillar Trim Panel To Remove
    GF0004831Courtesy of FORD MOTOR CO.
  7. To install, reverse the removal procedure.