Master Cylinder: Inspection

Wash master cylinder body, bore and piston assemblies with denatured or isopropyl alcohol. Inspect master cylinder bore. If grooved or pitted, replace master cylinder assembly. Inspect piston assemblies and return springs. Replace primary piston if scored, worn, cracked or broken. If primary piston body is good, component kit is available for replacement of damaged components. Replace secondary piston as an assembly if scored, worn, cracked or broken. Replace springs as necessary.

Wash master cylinder body, bore and piston assemblies with denatured or isopropyl alcohol. Inspect piston assemblies and return springs. Replace pistons if scored, worn, cracked or broken. Replace springs as necessary.