LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Parking Brake System & Actuation -- F250-F550 Super Duty) >> Diagnosis And Testing >> Parking Brake >> Pinpoint Tests >> Pinpoint Test A: The Parking Brake Will Not Apply

Pinpoint Test A: The Parking Brake Will Not Apply

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. A1 CHECK THE PARKING BRAKE CABLES 
    • Raise and support the vehicle.
    • Inspect for broken or binding parking brake cables.
    • Is there a parking brake cable concern? 
  2. A2 CHECK THE PARKING BRAKE CONTROL 
    • Operate the parking brake control.
    • Does the parking brake control operate smoothly? 
    • Yes  : GO to A3.
    • No  : REPAIR the binding condition in the parking brake control. TEST the system for normal operation.
  3. A3 CHECK THE PARKING BRAKE COMPONENTS 
    • Remove the brake disc. Refer to BRAKE DISC .
    • Operate the parking brake control and observe the parking brake components.
    • Do the parking brake components operate correctly? 
    • Yes  : CHECK the parking brake shoe installation. REFER to PARKING BRAKE SHOES ,.
    • No  : REPAIR the worn or damaged components. TEST the system for normal operation.