LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Power Rack & Pinion >> Removal & Installation >> Power Rack & Pinion Steering Gear >> Installation (Focus)

Installation (Focus)

CAUTION: Ensure pressure valve is correctly located in valve body.

Check "O" ring seals for perishing, splits or cuts. Install NEW "O" ring seals as necessary. Install steering gear. To complete installation, reverse removal procedure. Refill and bleed hydraulic system. Tighten bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals