LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4S >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission Removal & Installation >> Removal & Installation >> Ax4N (2001) & Ax4S >> Installation (Continental, 3.0L 4V - Sable & Taurus)

Installation (Continental, 3.0L 4V - Sable & Taurus)

  1. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Install NEW circlip on axle shaft before installing axle shaft. Fill transaxle with appropriate fluid. See appropriate AUTOMATIC TRANSMISSION article.
  2. Check and adjust axle shaft positioning. See appropriate FWD AXLE SHAFTS article in DRIVE AXLES. Check front toe-in after installation, and adjust as necessary.
scientia non olet · About LEMON Manuals