Removal & Installation

Remove the front bumper cover. Disconnect the front oil cooler tube. See Fig 1. Disconnect and remove the front cooler tube. See Fig 2.
Disconnect the rear cooler tube. See Fig 4. Remove the rear transaxle cooler tube bracket bolt and the cooler tube. See Fig 3.
Lower the vehicle. Disconnect and remove the integral-to-auxiliary cooler tube. See Fig 5. To install, reverse the removal procedure.

Fig 1: Removing & Installing Front Oil Cooler Clamps

Courtesy of FORD MOTOR CO.

Fig 2: Locating Front Oil Cooler Tube

Courtesy of FORD MOTOR CO.

Fig 3: Removing & Installing Transmission Oil Cooler Line Bracket & Bolt

Courtesy of FORD MOTOR CO.

Fig 4: Locating Rear Oil Cooler Tube Integral-To-Auxiliary Cooler Tube

Courtesy of FORD MOTOR CO.

Fig 5: Locating Integral-To-Auxiliary Cooler Tube

Courtesy of FORD MOTOR CO.