LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Adjustments >> Shift Indicator >> Expedition, "F" Series, Navigator & Ranger

Expedition, "F" Series, Navigator & Ranger

  1. Disconnect negative battery cable. Remove ignition lock cylinder by turning ignition switch to RUN position. Insert punch into lock release tab hole located under lock cylinder. Press lock tab, and pull out lock cylinder. Remove tilt wheel lever, if equipped. Remove upper steering column cover.
  2. Place range selector in "OD" position. Hang a 3 lb. (1.4 kg) weight from range selector lever. Center pointer in middle of "OD" position by rotating thumbwheel located on shift indicator cable. Shift range selector lever through all ranges to ensure proper operation. Install upper steering column cover, ignition cylinder and tilt wheel lever. Connect negative battery cable.
scientia non olet · About LEMON Manuals